Kundenservice
Trustpilot 4.5 sterren
Zur Startseite gehen

Assembly Instructions

Below you will find step-by-step assembly instructions for our products. Follow the steps carefully for the best result.

Frame / Canvas

1

What you need

Make sure you have a pencil, measuring tape, spirit level and a drill at hand. Use the included screws and wall plugs.

2

Mark hanging points

Measure the distance between the hanging eyes on the back of the frame. Mark the points on the wall with a pencil at the desired height. Use a spirit level to align the points horizontally.

3

Hang up

Drill holes at the marked points, insert the included wall plugs and screw in the screws. Leave the screws protruding about 5mm. Hang the frame on the screws and check that it is level.

Coffee Table

1

Check parts

Lay all parts on a soft surface. Check that all parts and fastening materials are present according to the included parts list.

2

Attach legs

Turn the table top upside down on a soft surface. Attach the legs by hand-tightening the included bolts. Then tighten all bolts firmly with the included Allen key.

3

Turn table over

Carefully turn the table over. Check that the table is stable and all legs are even. Place the included felt pads under the legs to protect your floor.

Glass Painting

1

Preparation

Carefully remove the packaging. Wear gloves to prevent fingerprints. Check the glass for any transport damage before you start hanging.

2

Determine hanging point

Determine the desired position on the wall. Measure the hanging point on the back of the glass painting and mark this point on the wall. Use a spirit level for a straight result.

3

Hang safely

Drill a hole at the marked point and insert the included wall plug. Screw in the screw and leave it protruding about 5mm. Carefully hang the glass painting and check that it hangs securely and level.